Mitsubishi DD-6050 Manuel d'utilisateur télécharger pdf (Page 201)

201

Parker Compax3

Parker Compax3 Servo Drive

http://www.parker.com

HMI Setting:

RS232

Parameters Recommend Option Notes

PLC type Parker Compax3 [V1.50]

Com port RS-232 Must match the PLC’s port setting.

Baud rate 115200 Must match the PLC’s port setting.

Parity bit None Even, Odd, None Must match the PLC’s port setting.

Data Bits 8 7 or 8 Must match the PLC’s port setting.

Stop Bits 1 1 or 2 Must match the PLC’s port setting.

PLC Station No. 0 0 Must be 0 for RS232

RS485

Parameters Recommend Option Notes

PLC type Parker Compax3 [V1.50]

Com port RS-485 2W Must match the PLC’s port setting.

Baud rate 9600 Must match the PLC’s port setting.

Parity bit None Even, Odd, None Must match the PLC’s port setting.

Data Bits 8 7 or 8 Must match the PLC’s port setting.

Stop Bits 1 1 or 2 Must match the PLC’s port setting.

PLC Station No. 1 1-99

Range from 1 to 99 for RS485,

according to the PLC’s setting.

Device address:

Bit/Word Device Type Format Range Memo

DW Register_Int DDD(dd) 0-9999(99) Integer register

DW Register_Float DDD(dd) 0-9999(99) Floating point register

Note: D (Decimal).

About device address range details, please refer to the PLC manual.

Example: read/write address:1901.2, please input 190101.

1 2 ... 196 197 198 199 200 201 202 203 204 205 206 ... 256 257

Pas de commentaire

Mitsubishi DD-6050 Manuel d'utilisateur Page 201