Mitsubishi MOTION CONTROLLERS Q173DCPU Manuel d'instructions télécharger pdf (Page 167)

4 - 22

4 INSTALLATION AND WIRING

(b) Q173DCPU(-S1)/Q172DCPU(-S1)

1) Precautions for handling the battery lead wire

• For connection or removal of the battery lead wire, do it surely while

holding a battery lead connector.

Connector (BATTERY)

Battery holder unit

(Q170DBATC)

Q6BAT

Battery lead wire

Battery lead connector

MITSUBISHI

LITHIU M BATTERY

Do not hold lead wire

2) Connection of the battery lead wire

• For connection of a battery (Q6BAT) to the battery holder unit, connect

it surely to a connector (BATTERY) of battery holder unit while holding

a battery lead connector. Be sure to insert it until it clicks.

3) Removal of the battery lead wire

• For removal of the battery lead wire, pull out it while holding a battery

lead connector.

POINT

(1) Forced removal the battery lead wire will damage the battery connector,

battery lead wire.

(2) The programs, parameters, motion devices (#), latch range devices and

absolute position data of SRAM built-in Motion CPU module are not backed up

if the battery connector is not connect correctly.

1 2 ... 162 163 164 165 166 167 168 169 170 171 172 ... 251 252

Pas de commentaire

Mitsubishi MOTION CONTROLLERS Q173DCPU Manuel d'instructions Page 167