Mitsubishi Q62DAN Manuel d'utilisateur télécharger pdf (Page 33)

1 - 18 1 - 18

MELSEC-Q

1 GENERAL SPECIFICATIONS AND PRECAUTIONS FOR USE OF I/O

MODULE

1.3.3 Switch setting of interrupt module

Perform the switch setting on the I/O assignment tab of PLC parameter when

operating the interrupt input for QI60, QX40H, QX70H, QX80H, or QX90H.

Select "Interrupt" in the "Type" combo box on the I/O assignment tab of PLC

parameter. Then, click the "Switch setting" button, and then select "HEX" in the "Input

format" combo box. Lastly, set 0 (leading edge) or 1 (trailing edge) in the "Switch1" box

for the interrupt processing.

Choose Interrupt. Choose Switch setting.

Choose HEX.

Set the interrupt processing conditions

(leading edge/trailing edge) of CH1 to CH16.

Setting inhibited.

Set the interrupt processing condition with switch 1. The relationships between bits and inputs are as indicated

below.

XE XD XC XB XA

X9 X8 X7 X6 X5 X4 X3 X2 X1 X0

b0b15 to

0: Leading edge, 1: Trailing edge

1 2 ... 28 29 30 31 32 33 34 35 36 37 38 ... 143 144

Pas de commentaire

Mitsubishi Q62DAN Manuel d'utilisateur Page 33