Mitsubishi SC-SL2NA-E Manuel d'installation télécharger pdf (Page 7)

DO NOT install interface and wired remote control

on the following places

Places exposed to direct sunlight

Places near heat devices

High humidity places

Hot surface or cold surface enough to generate condensation

Places exposed to oil mist or steam directly

Uneven surface

1 Fasten it to a wall or pillar

(

wood screws)

2Fasten it to the electrical box.

2 M4 screws (procured locally)

2 Mount the

upper case

3Mount the upper case

Electrical box

(procured locally)

Connection cable

Wiring inlet

Mounting with the mounting bracket

If the unit is mounted directly to a wall

Recessing the unit in a wall

Install the interface so that the connection cable can reach the indoor

unit (approximately 1.3 m).

If the connection cable is extended, operation will be faulty, so do

not extend the cable.

Fasten the unit to a wall, pillar or similar location.

Use a side cutter or

similar tool to open

the thin knockouts in

the case for running

wires.

1Mount the lower case of the interface unit to a flat

surface using the wood screws supplied with the

unit.

2Mount the upper case.

Recess the electrical box (procured locally) and

each connection cable inside the wall.

Fasten the lower case of the interface unit to the

electrical box using screws (M4 screws, procured

locally).

Mount the upper case to the lower case.

1Mount the interface unit’s upper case.

2Mount the mounting bracket to the interface unit

using the tapping screws supplied with the unit.

3Mount the mounting bracket to a wall surface, etc.

using the wood screws provided.

Interface installation

1Recess the electrical

box and connection cables

2Mount the mounting bracket

on the interface unit.

(

tapping screws)

3Mount the bracket

on a wall or pillar

(

wood screws)

1 2 3 4 5 6 7 8 9 10 11 12 ... 19 20

Commentaires sur ces manuels

Pas de commentaire

Mitsubishi SC-SL2NA-E Manuel d'installation Page 7

Commentaires sur ces manuels

Produits connexes et manuels pour Matériel d'enregistrement Mitsubishi SC-SL2NA-E