Mitsubishi SC-SL2NA-E Manuel d'installation télécharger pdf (Page 13)

Function

setting

(Note3)

(Note1)

(Indoor unit function)

Only when plural indoor units are connected

Indoor No. selection

AIRCON NO.

If to change re-set with other indoor

unit, push

button, and indoor selection indication

(for example: I/U 000) is set back.

The filter sign is indicated after running for 180 hours.

The filter sign is indicated after running for 600 hours.

The filter sign is indicated after running for 1000 hours.

The filter sign is indicated after running for 1000 hours, then the indoor unit will be stopped by compulsion after 24 hours.

To be reset for producing +3.0

C increase in temperature during heating.

To be reset for producing +2.0

C increase in temperature during heating.

To be reset for producing +1.0

C increase in temperature during heating.

When heating thermostat is OFF, fan speed is low speed.

When heating thermostat is OFF, fan speed is set speed.

When heating thermostat is OFF, fan speed is operated intermittently.

When heating thermostat is OFF, the fan is stopped.

When the remote thermistor is working, "FAN OFF" is set automatically.

Do not set "FAN OFF" when the indoor unit's thermistor is working.

Change of indoor heat exchanger temperature to start frost prevention control.

Working only with the single split series.

To control frost prevention, the indoor fan tap is raised.

Drain pump is run during cooling and dry.

Drain pump is run during cooling, dry and heating.

Drain pump is run during cooling, dry, heating and fan.

Drain pump is run during cooling, dry and fan.

After cooling is stopped or cooling thermostat is OFF, the fan does not perform extra operation.

After cooling is stopped or cooling thermostat is OFF, the fan perform extra operation for half an hour.

After cooling is stopped or cooling thermostat is OFF, the fan perform extra operation for an hour.

After cooling is stopped or cooling thermostat is OFF, the fan perform extra operation for six hours.

After heating is stopped or heating thermostat is OFF, the fan does not perform extra operation.

After heating is stopped or heating thermostat is OFF, the fan perform extra operation for half an hour.

After heating is stopped or heating thermostat is OFF, the fan perform extra operation for two hours.

After heating is stopped or heating thermostat is OFF, he fan perform extra operation for six hours.

During heating is stopped or heating thermostat is OFF, the fan perform intermittent operation for five minutes with low fan speed after

twenty minutes' OFF.

During heating is stopped or heating thermostat is OFF, the fan perform intermittent operation for five minutes with low fan speed after

five minutes' OFF.

To be reset producing +2.0