Mitsubishi PAR-21MAA Manuel d'installation télécharger pdf (Page 11)

How to Select Functions of remote controller

The setting of the following remote controller functions can be changed using the remote controller function selection mode.

Change the setting when needed.

Item 1

1.Change Language

("CHANGE LANGUAGE")

2.Function limit

("FUNCTION SELECTION")

3.Mode selection

("MODE SELECTION")

4.Display change

("DISP MODE SETTING")

Item 3 (Setting content)

Display in multiple languages is possible.

Setting the range of operation limit (operation lock)

Setting the use or non-use of "automatic" operation mode

Setting the temperature adjustable range (maximum, minimum)

Selecting main or sub remote controller

When 2 remote controllers are connected to 1 group, 1 controller must be set to sub.

Setting the use or non-use of clock function

Setting the timer type

Contact number display in case of error

Setting the telephone number

Setting the temperature unit ( °C or °F) to display

Setting the use or non-use of the display of indoor (suction) air temperature

Setting the use or non-use of the display of "Cooling" or "Heating" display during

operation with automatic mode

Item 2

Language setting to display

(1)

Operation function limit setting (operation lock) ("

LOCKING FUNCTION

(2)

Use of automatic mode setting ("SELECT AUTO MODE")

(3)

Temperature range limit setting ("LIMIT TEMP FUNCTION")

(1)

Remote controller main/sub setting ("CONTROLLER MAIN/SUB")

(2) Use of clock setting ("CLOCK")

(3) Timer function setting ("WEEKLY TIMER")

(4) Contact number setting for error situation ("CALL.")

(1) Temperature display /°F setting ("TEMP MODE °C /°F")

(2)

Room temperature display setting ("ROOM TEMP DISP SELECT")

(3)

Automatic cooling/heating display setting ("AUTO MODE DISP C/H")

[Function selection flowchart] Refer to next page.

[1]

Stop the air conditioner to start remote controller function selection mode.→

[2] Select from item1.

→

[3] Select from item2.

→

[4] Make the setting.

(Details are specified in item3)

→

[5] Setting completed.

→

[6] Change the display to the normal one. (End)

[Detailed setting]

[4] -1. CHANGE LANGUAGE setting

The language that appears on the dot display can be selected.

Japanese (JP), English (GB), German (D), Spanish (E),

Russian (RU), Italian (I), Chinese (CH), French (F)

[4] -2. Function limit (FUNCTION SELECTION)

(1) Operation function limit setting

(operation lock)(LOCKING FUNCTION)

no1 : Operation lock setting is made on all buttons other than

the [

ON/OFF] button.

no2 : Operation lock setting is made on all buttons.

OFF (Initial setting value) : Operation lock setting is not made

* To make the operation lock setting valid on the normal screen, it is

necessary to press buttons (Press and hold down the [FILTER]

and [ ON/OFF] buttons at the same time for 2 seconds.) on

the normal screen after the above setting is made..

(2) Use of automatic mode setting

When the remote controller is connected to the unit that has auto-

matic operation mode, the following settings can be made.

ON (Initial setting value) : The automatic mode is displayed when

the operation mode is selected.

OFF : The automatic mode is not displayed

when the operation mode is selected.

[4] -3. Mode selection setting (MODE SELECTION)

(1) Remote controller main/sub setting

Main : The controller will be the main controller.

Sub : The controller will be the sub controller.

(2) CLOCK setting

ON : The clock function can be used.

OFF: The clock function cannot be used.

(3) Timer function setting

WEEKLY TIMER (initial setting):

The weekly timer can be used.

AUTO OFF TIMER: The auto off timer can be used.

SIMPLE TIMER : The simple timer can be used.

TIMER MODE OFF: The timer mode cannot be used.

* When CLOCK setting is OFF, the "WEEKLY TIMER" cannot be used.

(4) Contact number setting for error situation

CALL OFF :

The set contact numbers are not displayed in case of error.

CALL **** *** **** : The set contact numbers are displayed in case

of error.

(3) Temperature range limit setting (LIMIT TEMP FUNCTION)

After this setting is made, the temperature can be changed within the set range.

LIMIT TEMP COOL MODE :

The temperature range can be changed on cooling/dry mode.

LIMIT TEMP HEAT MODE :

The temperature range can be changed on heating mode.

LIMIT TEMP AUTO MODE :

The temperature range can be changed on automatic mode.

OFF (initial setting) : The temperature range limit is not active.

When the setting, other than OFF, is made, the temperature range limit setting

on cooling, heating and automatic mode is made at the same time. However

the range cannot be limited when the set temperature range has not changed.

To increase or decrease the temperature, press the [ TEMP ( ) or ( )] button.

To switch the upper limit setting and the lower limit setting, press the

[ ]

button. The selected setting will blink and the temperature can be set.

Settable range

Cooling/Dry mode : Lower limit: 19 ~ 30 , 67°F~87°F

Upper limit: 30 ~ 19 , 87°F~67°F

Heating mode : Lower limit: 17 ~ 28 , 63°F~83°F

Upper limit: 28 ~ 17 , 83°F~63°F

Automatic mode : Lower limit: 19 ~ 28 , 67°F~83°F

Upper limit: 28 ~ 19 , 83°F~67°F

CALL_ : The contact number can be set when the display is as

shown on the left.

Setting the contact numbers

To set the contact numbers, follow the follo

wing procedures

Move the blinking cursor to set numbers. Press the [

TEMP. ( )

and(

)]

button to move the cursor to the right (left). Press the [

CLOCK

(

) and ( )] button to set the numbers.

[4] -4. Display change setting (DISP MODE SETTING)

(1) Temperature display / °F setting

: The temperature unit is used.

°F : The temperature unit °F is used.

(2) Room temperature display setting (ROOM TEMP DISP SELECTION)

ON : The room temperature is displayed.

OFF: The room temperature is not displayed.

(3) Automatic cooling/heating display setting (AUTO MODE DISP C/H)

ON : One of "Automatic cooling" and "Automatic heating" is displayed

under the automatic mode is running.

OFF: Only "Automatic" is displayed under the automatic mode.

. How to Select Functions of remote controller

Function Items

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 75 76

Commentaires sur ces manuels

Pas de commentaire

Mitsubishi PAR-21MAA Manuel d'installation Page 11

Commentaires sur ces manuels

Produits connexes et manuels pour Climatiseurs à système divisé Mitsubishi PAR-21MAA