Mitsubishi MSH-24NV Manuel de service télécharger pdf (Page 36)

11-2. MUCFH-24NV -

OUTDOOR UNIT

OPERATING PROCEDURE PHOTOS

Photo 1

Photo 2

Photo 4

Propeller

fan nut

Valve bed

Separator support plate

Motor support

Propeller

fan

Screws of the cabinet

Top panel

Service panel

Cover panel

Cabinet

Screws of the top panel

Photo 3

Terminal

block

Deicer P.C.

board

52C

Contactor

1. Removing the cabinet

(1) Remove the screws of the top panel and the top panel.

(2) Remove the screw of the service panel. To remove the

service panel, pull it down toward you and unhook the

catches on the both sides.

(3) Remove the screw of the cover panel. To remove the

cover panel.

(4) Remove the screws of the cabinet.

Open the cabinet to a 45-degree angle. Then lift it and

unhook the catches to remove.

3. Removing the propeller fan and the outdoor fan motor

(1) Remove the cabinet. (Refer to 1)

(2) Remove the propeller fan nut and the propeller fan.

NOTE:Loose the propeller fan in the rotating direction for

removal.

When attaching the propeller fan, align the mark on

the propeller fan and the motor shaft cut section.

Set the propeller fan in position by using the cut on

the shaft and the mark on the propeller fan.

(3) Remove the screws and the outdoor fan motor and the

connectors.

Remove the outdoor fan motor.

2. Removing the deicer P.C. board

(1) Remove the top panel, the service panel and the cover

panel.

(2) Disconnect all the connectors and the terminals on the

deicer P.C. board.

(3) Remove the deicer P.C. board.

Separator

OB266--2.qxp 01.4.13 10:32 AM Page 36

1 2 ... 31 32 33 34 35 36 37 38 39 40 41 42 43 44

Commentaires sur ces manuels

Pas de commentaire

Mitsubishi MSH-24NV Manuel de service Page 36

Commentaires sur ces manuels

Produits connexes et manuels pour Climatiseurs à système divisé Mitsubishi MSH-24NV