Mitsubishi 838 Series Manuel d'utilisateur

1 CONNECTING 3D READY DLP TV’S See our page www.3dmagic.com for color versions of the most recent manuals THE COMPLEXITY OF THESE INSTRUCTION

10 channel audio but if you have a multichannel system you should be able to use a Toslink cable to connect an amplifier directly to your source to

11 3) Set your pc video card for 1280 x 720 @ 60 Hz or 1920 x 1080 @ 60 Hz(720p or 1080p) output. 4) Press 3D button on the remote control until y

12 4) In Older Models, press 3D button on the remote control until you see "DLP 3D/DUAL-VIEW: ON STD GLS" or "DLP 3D/DUAL-VIEW: ON

13 1. With all equipment turned off connect the HDMI OUT of your 3D source (Set Top Box, 3D Blu-Ray player, PS3, XBOX, PC, Mac) to the HDMI IN of t

14 Troubleshooting the DirecTV 3D Set Top Box (likewise for Verizon, Cox etc.) 1. If you still do not get 3D from your STB proceed as follows.

15 addition to the HDMI issues you may have issues with HDCP (High Definition Copyright Protection) and CEC(Consumer Electronics Control) protocols

16 1. Both Mits and Sams MAY intro Firmware updates in 2011 that fix these issues in some models. 1.Update your Playstation 3 to the latest firmwa

2 glasses and/or our SS1 emitter (which is compatible with all types of original and 3rd party Samsung type glasses) cost much less and are compatib

3 Gefen HDMI Detective Plus with ANY 3D glasses kit to convert the side by side format to checkerboard format. This has NOTHING to do with our kits

4 For ALL TV’s if you cannot get 3D to work and you have checked carefully to make sure your emitter is fully plugged in, it is a good idea to reset

5 Without the glasses, you should see TWO images overlapping on the screen. As it tells you on p34 of your manual, in the 737-837 series the 3D Opt

6 7) If you are using the Mitsubishi 3D A1 Converter BOX between your 3D BluRay player and your TV, connect the player to the BOX with its HDMI ca

7 6) Without the glasses, you should see TWO images overlapping on the screen. 7) If you are using our Model X glasses with our Emitter make sure t

8 6)If you are using our Model S glasses make sure they are fully charged, press the button to turn them on and put them on. 7) If you are using

9 from the net. If you need pc input you don’t need the 3DA-1 or the Gefen!!!! NOTE WELL—the older Pre 2010 Samsung PLASMA 3D TV’s and some DLP’s