Mitsubishi 738 Series Instructions d'exploitation télécharger pdf (Page 5)

For assistance call 1(800) 332-2119

Using the Adapter

If using an emitter, position it where there

will be a clear path to the 3D glasses.

Note: An emitter is not needed for 3D

glasses using DLP Link.

Power on the TV and the 3D video device.

Note: The 3D video device must be powered on before the 3D Adapter

can power on.

If the 3D Adapter does not power on automatically when you power

on the 3D video device, press the

POWER

button.

If the

New Input Found screen displays, assign a name to the

input. If you have an 833 series TV, name the input Game.

Start video from the 3D video device and wait a few moments for an

image to appear.

Enable the TV’s 3D mode. For an 833 series TV, 3D settings are in

the FX Gaming menu.

Select the Adapter’s 3D mode. Press the

3D MODE

button to change.

For ordinary 2D signals, keep the Adapter powered on and use •

3D Mode Normal.

For automatic detection of HDMI 1.4a 3D signals, use 3D Mode •

Normal.

For non-HDMI 1.4a 3D signals, press the •

3D MODE

button

repeatedly until the picture appears correct.

Picture Troubleshooting

Blurry double image,

checkerboard format.

Turn on TV’s 3D mode.

Press

3D MODE

button to

select 3D Mode

Normal

Two images, top-and-

bottom format. Press

3D MODE

button to select

3D Mode for top/bottom.

Two images, side-by-

side format. Press

3D MODE

button to select

3D Mode for side-by-side.

The Mitsubishi 3D Adapter, Model 3DA-1, may be used to display

3D content only when connected to a Mitsubishi 3D Ready TV or a

Mitsubishi 3D TV. A 3D source device coupled with the Mitsubishi 3D

Adapter is required to support display of 3D games, 3D broadcasts

from terrestrial/cable/satellite and 3D Blu-ray disc content.

1 2 3 4 5 6 7 8

Commentaires sur ces manuels

Pas de commentaire

Mitsubishi 738 Series Instructions d'exploitation Page 5

Commentaires sur ces manuels