Mitsubishi PCA-RP140KAQ Manuel de service télécharger pdf (Page 39)

OPERATING PROCEDURE

PHOTOS & ILLUSTRATIONS

13. Removing the heat exchanger

(1) Remove the air intake grille. (See Figure 1, 2)

(2) Remove the beam. (See Photo 1)

(3) Remove the electrical cover. (See Photo 1)

(4) Pull the electrical box downward. (See Photo 2)

(5) Remove the left and right side panels. (See Figure 3)

(6) Remove the under panel. (See Photo 14)

(7) Remove the drain pan. (See Photo 15,16,17)

(8) Remove the pipe cover. (See Photo 18)

(9) Remove the pipe thermistors (TH2 and TH5) from each

holder. (See Photo 19)

(

) Remove the pipe band fixing screw and remove the

pipe band. (See Photo 22)

(

) Remove 2 screws from the heat exchanger and

remove the heat exchanger.

Photo 22

Pipe band fixing

screw

Pipe band

Heat exchanger

fixing screws

Heat exchanger Vane

Photo 23

Heat exchanger

1 2 ... 34 35 36 37 38 39 40

Pas de commentaire

Mitsubishi PCA-RP140KAQ Manuel de service Page 39