Mitsubishi DX-TL4509E(Z) Manuel d'instructions télécharger pdf (Page 76)

Memory (continued)

System Menu

Notes for using the external device

The various external HDDs can be connected to this unit

in order to expand the memory or to use as the copy

device, however, when you record or playback at high rate,

the picture may be missed during recording or playback

depending on the external device connected due to the delay

of the data transfer rate or respond of the external device.

Check the operation before the actual operation.

Do not use the power control function of the external device

which uses bus power of this unit.

Attaching the HDD and setting the ID number

For connecting the HDD to the SERIAL BUS port on this unit,

use the USB 2.0 cable. The ID number is not necessary to

be set because the unit automatically recognizes the HDD

attached.

Make sure that the MAIN switch on the rear panel is turned

off before connecting the external HDDs.

The order of recording/playback when internal and

external HDDs are registered as the main device

The order of the internal HDD used for recording/playback is:

internal A

internal B.

When all the internal HDD is used up, the HDD connected

to SERIAL BUS port is used for recording/playback. The

recording order is indicated next to the device name (“Main,”

“Copy1,” or “Copy2”) in <External HDD (USB HDD)> (

page 75).

When all the serial bus HDD is used up, the internal HDD is

used for recording/playback again.

In case of serial bus HDD, the HDD which is added latest is

registered to the last number.

Add/Remove DVD/CD Drive

This item is used to set the DVD/CD drive for the DVD/CD

group of the copy 1 or 2 device.

You cannot set this item during recording or playback.

Memory5

Add/Remove DVD/CD Drive

System Menu

step

1. Make sure that the DVD/CD drive connected is

displayed in the <Add/Remove DVD/CD Drive>.

• When you select “Eject,” the access LED on the

device illuminates and the disc tray opens.

step

2. Select the desired device for DVD/CD drive.

Copy1: Registers for the copy 1 device.

Copy2: Registers for the copy 2 device.

• The button changes between “Copy1” and

“Copy2” each time you press the button.

1 2 ... 71 72 73 74 75 76 77 78 79 80 81 ... 127 128

Commentaires sur ces manuels

Pas de commentaire

Mitsubishi DX-TL4509E(Z) Manuel d'instructions Page 76

Commentaires sur ces manuels

Produits connexes et manuels pour Matériel d'enregistrement Mitsubishi DX-TL4509E(Z)